CCC ONE® Estimating Files
When preparing CCC estimating systems to export estimates, use the default settings of the product or make note of where you save your exported data. If you use the default settings for CCC estimating systems, your estimates display automatically when you select CCC prior to uploading.
This procedure describes how to enable EMS export and set the primary export directory in your estimating product.CCC estimating products are not Mitchell products, and Mitchell does not support or control such products. This procedure is believed to be accurate at the time of this release. However, any representations of a non-Mitchell product are subject to change without notice. Contact your system administrator or CCC for technical support.
Before you can upload estimates you need to export EMS (Estimating to Management System) files from your estimating program.
How to
Configure your estimate export options
-
On the toolbar click, Configure, then click Machine Settings.
-
From Machine Settings, expand the Import/Export options, and then click EMS Extract Preferences. These options determine when or if CCC ONE will create an extract and if you will receive a confirmation message
-
Click File Export. Select EMS 2.01 Estimate as the Export Type.
-
Select the Location(s) to apply to this setting.
-
Locate the EMSOUT directory path.
-
Click OK to add this export path to your Machine Settings
Once you have the EMS Rules set up, you can create EMS Extracts. When you create an EMS Extract, your data is saved to the path you chose in the EMS Export.Your EMS files should automatically export upon locking the estimate, but you can also extract them manually:
